OA Exams

  • web.groovymark@gmail.com
  • November 26, 2024

Question 21

 A laser printer is smudging printed pages. What is the most likely cause?

  • A) Faulty toner cartridge
  • B) Faulty fuser
  • C) Paper misalignment
  • D) Dirty rollers

Correct Answer: B) Faulty fuser

Explanation: If the fuser isn’t heating properly, toner won’t be fully bonded to the paper, causing smudging.

Question 22

After removing an adapter card from a PC, should the technician install a blanking plate?

  • A) No
  • B) Yes

Correct Answer: B) Yes

Explanation: Installing a blanking plate ensures proper airflow and prevents dust from entering the case.

Question 23

A USB connector is shown in the exhibit. What type of USB connector is it?

  • A) USB-A
  • B) USB-C
  • C) USB 2.0 Type B micro
  • D) USB-B

Correct Answer: C) USB 2.0 Type B micro

Explanation: This connector type is used in older USB 2.0 devices, such as external hard drives.

Question 24

A technician notices two unused Molex connectors in a PC. What is their purpose?

  • A) They power USB devices
  • B) They power internal storage devices
  • C) They are legacy connectors for printers
  • D) They connect to the motherboard

Correct Answer: B) They power internal storage devices

Explanation: Molex connectors are used for powering older internal drives.

Question 25

What is the bandwidth of a PCIe v2.0 x16 graphics adapter?

  • A) 4 GBps
  • B) 8 GBps
  • C) 16 GBps
  • D) 32 GBps

Correct Answer: B) 8 GBps

Explanation: PCIe v2.0 supports 500 MBps per lane, resulting in 8 GBps for x16 lanes.

Question 26

What type of motherboard socket is used to install system memory?

  • A) LGA
  • B) DIMM
  • C) PGA
  • D) DIP

Correct Answer: B) DIMM

Explanation: DIMM sockets are used for installing system memory (RAM) in modern motherboards.

Question 27

 Can a PCIe x8 card fit into a PCIe x16 slot?

  • A) No
  • B) Yes, but with reduced functionality
  • C) Yes, without reduced functionality
  • D) Only in certain motherboards

Correct Answer: B) Yes, but with reduced functionality

Explanation: A PCIe x8 card can fit into an x16 slot, but it may only function as a x1 device.

Question 28

A technician is labeling spare parts for inventory. What type of motherboard is shown?

  • A) ATX
  • B) Micro-ATX
  • C) Mini-ITX
  • D) BTX

Correct Answer: B) Micro-ATX

Explanation: Micro-ATX motherboards are square, typically 9.6 inches x 9.6 inches.

Question 29

 Which two types of display cables can be connected to a laptop with a 15-pin VGA port and HDMI port?

  • A) VGA and HDMI
  • B) DVI and DisplayPort
  • C) USB and Thunderbolt
  • D) RJ45 and USB

Correct Answer: A) VGA and HDMI

Explanation: VGA and HDMI ports are commonly used to connect external displays to laptops.

Question 30

What type of port is a DVI-I connector?

  • A) Digital only
  • B) Analog only
  • C) Digital and analog
  • D) Ethernet

Correct Answer: C) Digital and analog

Explanation: DVI-I supports both digital and analog signals, making it versatile for various display types.

Question 31

Which of the following statements about PCI is NOT true?

  • A) PCI is slower than PCIe
  • B) PCI cards cannot fit into PCIe slots
  • C) PCI is a shared bus architecture
  • D) PCI can support up to 32 lanes

Correct Answer: D) PCI can support up to 32 lanes

Explanation: PCI is limited in bandwidth and does not support multiple lanes like PCIe.

Question 32

A technician opens a PC and sees a square socket component. What has the technician located?

  • A) CPU
  • B) RAM
  • C) GPU
  • D) Southbridge

Correct Answer: A) CPU

Explanation: The square socket on a motherboard is for the CPU.

Question 33

A technician finds a SCSI connector on the motherboard. What is it likely connected to?

  • A) USB drive
  • B) Hard disk
  • C) Network interface card
  • D) RAM

Correct Answer: B) Hard disk

Explanation: SCSI connectors are typically used for connecting hard disks in legacy systems.

Question 34

What type of cable will a technician use to connect a USB port on a portable monitor to an HDMI port on a laptop to extend the display?

 

  • A) HDMI-to-DisplayPort adapter
  • B) HDMI-to-DVI adapter
  • C) USB-to-HDMI adapter
  • D) USB-C to USB-A cable

Correct Answer: C) USB-to-HDMI adapter

Explanation: A USB-to-HDMI adapter allows a USB port to interface with an HDMI display.

Question 35

A monitor with a USB-C cable does not function when connected to a computer’s USB-C port. Why?

  • A) The cable is faulty
  • B) The port is not Thunderbolt 3-compatible
  • C) The monitor is incompatible with the OS
  • D) The display driver is outdated

Correct Answer: B) The port is not Thunderbolt 3-compatible

Explanation: Thunderbolt 3 is required for USB-C to carry display signals.

Question 36

A technician is working on a motherboard that measures 12″ x 9.6″ and has seven expansion slots. What is the form factor?

  • A) ATX
  • B) Micro-ATX
  • C) Mini-ITX
  • D) BTX

Correct Answer: A) ATX

Explanation: ATX motherboards are 12 inches by 9.6 inches, with seven expansion slots.

Question 37

How does all software appear to a CPU?

  • A) Assembly code
  • B) Hexadecimal
  • C) Machine code
  • D) Binary

Correct Answer: D) Binary

Explanation: All software instructions are converted into binary, which the CPU processes.

Question 38

How much storage will be available when configuring four 120 GB drives in a RAID 5 array?

  • A) 240 GB
  • B) 360 GB
  • C) 480 GB
  • D) 120 GB

Correct Answer: B) 360 GB

Explanation: RAID 5 uses one drive’s worth of storage for parity, leaving 360 GB available.

Question 39

Does an M.2 SSD require NVMe for performance improvement?

  • A) Yes
  • B) No

Correct Answer: B) No

Explanation: M.2 is a form factor that supports both SATA and NVMe interfaces.

Question 40

What is the minimum number of disks required to implement RAID 10, and how much capacity is available?

  • A) 2 disks, 50% capacity
  • B) 4 disks, 100% capacity
  • C) 4 disks, 50% capacity
  • D) 6 disks, 100% capacity

Correct Answer: C) 4 disks, 50% capacity

Explanation: RAID 10 requires four disks, with 50% of the total capacity used for redundancy.

Complete the Captcha to view next question set.

Prev Post
WGU D316 Practice Exam Questions – Set 1 – Part 1
Next Post
WGU D316 Practice Exam Questions – Set 1 – Part 3